- Hydrodynamics, Mass and Heat transfer study for emerging Heterogeneous Fenton process in Multiphase Fluidized-bed Reactor System for wastewater treatment- a Review
- Kinetics of liquid-film process in gas absorption. Part I: Models of the absorption process
- Corrigendum to “A continuum model of stresses in a vertical silo with a flow channel in the vicinity of the wall, using the principal stress cap surface approach for the bulk solids” [Chem. Eng. Res. Des. 122 (2017) 211–225]
- Staging of di-methyl-ether (DME) synthesis reactor from synthesis gas (syngas): Direct versus indirect route
- Terahertz Pulsed Imaging as a New Method for Investigating the Liquid Transport Kinetics of α-Alumina Powder Compacts
- Comparative Analysis of Aeration and Oscillation in a Suspended Catalyst Photocatalytic Membrane Reactor
- Corrigendum to “Detailed numerical solution of pore volume and surface diffusion model in adsorption systems” [Chem. Eng. Res. Des. 122 (2017) 298–307]
- Synthetics, Mineral Oils, and Bio-based Lubricants, Leslie R. Rudnick (Ed.), CRC Press (2006), 206 pp., ISBN: 1-57444-723-8
- Fluid flow through granular beds
- Erratum to ‘Dead-end and crossflow ultrafiltration process modelling: Application on chemical mechanical polishing wastewaters’ [Chem. Eng. Res. Des. 158 (2020) 164–176]
- CRC Handbook of Chemistry and Physics, David R. Lide, 86th edition, CRC Press (2005), 2616pp, $139.95 ISBN 0 84930 486 5
- Chemical Engineering and the Postmodern World
- Principles of Gas-Solid Flows, L.S. Fan, C. Zhu, Cambridge University Press (1997), 557pp, $85, ISBN 0-521-58158-6
- 2008 Index
- Corrigendum to “Behaviour of LAPONITE® gels: Rheology, ageing, pH effect and phase state in the presence of dispersant” [Chem. Eng. Res. Des. 101 (2015) 65–73]
- Two-dimensional modeling investigation of the modern methanol plate reactors
- An efficient decomposition approach for the low-energy scheduling of a straight multiproduct pipeline
- Retraction notice to “Enhanced gas separation performance using carbon membranes containing nanocrystalline cellulose and BTDA-TDI/MDI polyimide” [Chem. Eng. Res. Des. 140 (2018) 221–228]
- Introduction to Process Control, José A. Romagnoli, Ahmet Palazoğlu, CRC Press (2005), 528 pp, $129.95, £39.99, ISBN: 0 8493 3496 9
- The 15th European Conference on Mixing
- Catalytic Deoxygenation of Palm Oil and its Residue in Green Diesel Production: a Current Technological Review
- Non-covalently-functionalized CNTs incorporating poly(vinyl alcohol) mixed matrix membranes for pervaporation separation of water-isopropanol mixtures
- Corrigendum to “Effect of PE-g-MA compatibilizer on the structure and performance of HDPE/EVA blend membranes fabricated via TIPS method” [Chem. Eng. Res. Des. 100 (2015) 237–247]
- CFD investigation of biogas reformate using membrane-assisted water gas shift reaction: parametric analyses
- Biorefinery value chain creation
- Sedimentation and fluidisation: Part I
- Corrigendum to “Removal of fluoride from water by nanocomposites of POPOA/Fe3O4, POPOA/TiO2, POPOT/Fe3O4 and POPOT/TiO2: modelling and optimization via RSM” [Chem. Eng. Res. Des. 126 (2017) 1–18]
- Retraction notice to “A simple predictive tool for monitoring steam loss in traps” [Chem. Eng. Res. Des. 90 (2012) 1896–1900]
- Handbook of Industrial Crystallization, Allan S. Myerson, 2nd edition, Butterworth-Heinemann (2002), 313 pp, £65, ISBN: 0-7506-7012-6
- Corrigendum to “Development of a combined solver to model transport and chemical reactions in catalytic wall-flow filters” [Chem. Eng. Res. Des. 117 (2016) 681–687]
- Logistics of Facility Location and Allocation, Dileep R. Sule, Marcel Dekker (2001), 476 pp, £112.61, ISBN: 0 8247 0493 2
- Chemical Process Equipment: Selection, Design, 2nd edition, James R. Couper, Roy W. Penney, James R. Fair, Stanley M. Walas (Eds.), Elsevier (2004), p. 776, £125.00, ISBN 0 75067 510 1
- 13th European conference on mixing: New developments towards more efficient and sustainable operations
- Modeling of spiral wound membranes for gas separations. Part III: A nonisothermal 2D permeation model
- Distillation—Principles and Practice, James R. Fair, Wiley-VCH, New York (1998), 524pp, £61.50, ISBN: 0 471 25241 7
- Corrigendum to ‘Energetic study of beech wood gasification in fluidized bed reactor under different gasification conditions’ [Chem. Eng. Res. Des. 164 December (2020) 23-34]
- Active Subsets as a Tool for Structural Characterisation and Selection of Metal-Organic Frameworks
- Distillation & Absorption 2018
- WITHDRAWN: Modeling of thermal cracking reactor with the aid of artificial neural networks
- Simulation and optimization of aromatic extraction from lube oil cuts by liquid-liquid extraction
- Re-Engineering the Chemical Processing Plant: Process Intensification, Andrzej Stankiewicz, Jacob A. Moulijn (Eds.), Marcel Dekker, Inc (2003), p. 529, $165, ISBN: 0 8247 4302 4
- The potential control strategies of membrane fouling and performance in membrane photocatalytic reactor (MPR) for treating palm oil mill secondary effluent (POMSE)
- Invalid URL
- Erratum to ‘Rigorous simulation and techno-economic analysis of a bio-jet-fuel intermediate production process with various integration strategies’ [Chem. Eng. Res. Des. 159 (2020) 47–65]
- Ionic liquids: Promising compounds for sustainable chemical processes and applications
- [sciencedirect.com] On multi-parametric programming and its applications in process systems engineering
- A review of in-line and on-line measurement techniques to monitor industrial mixing processes
- Review of extractive distillation. Process design, operation, optimization and control
- [sciencedirect.com] Integration of process design and control: A review
- Machine learning on sustainable energy: A review and outlook on renewable energy systems, catalysis, smart grid and energy storage