- Analysis of Graphene Nanoplatelet Reinforced Cylindrical Shell Subjected to Thermo-mechanical Loads
- Determination of geometric role and damage assessment in hybrid Fiber Metal Laminate (FML) joints based on acoustic emission
- Temperature resistant glass fibre-epoxy composites
- Corrigendum to “Buckling analysis of an imperfection-insensitive hybrid composite cylinder under axial compression – numerical simulation, destructive and nondestructive experimental testing” [Compos. Struct. 225 (2019) 111152]
- Corrigendum to “Basic mechanical properties of ultra-high ductility cementitious composites: From 40 MPa to 120 MPa” [Compos. Struct. 185(2018) 634–645]”
- Nonlinear dynamic analysis of microbeam containing graded shape memory microwires
- Buckling of cracked FG plate resting on elastic foundation considering the effect of delamination phenomenon
- Reliability-based buckling optimization with an accelerated Kriging metamodel for filament-wound variable angle tow composite cylinders
- A three-dimensional solution for free vibration and buckling of annular plate, conical, cylinder and cylindrical shell of FG porous-cellular materials using IGA
- Assessment Of The Existing Models To Evaluate The Shear Strength Contribution Of Externally Bonded FRP Shear Reinforcements
- Erratum to “A beam finite element for analysis of composite beams with the inclusion of bend-twist coupling” [Compos. Struct. 189 (2018) 707–717]
- A Nonlinear Dynamical Model for Rotating Composite Thin-Walled Beams Subjected to Hygrothermal Effects
- Corrigendum to “Numerical simulation and empirical comparison of the high velocity impact of STF impregnated Kevlar fabric using friction effects” [Compos Struct 125 (2015) 520–529]
- Static and dynamic hygrothermal postbuckling analysis of sandwich cylindrical panels with an FG-CNTRC core surrounded by nonlinear viscoelastic foundations
- Static Load-Bearing Capacity Formulation for Steel Tubular T/Y-Joints Strengthened with GFRP and CFRP
- Glass Reinforced Epoxy Systems
- Three-point flexural performance of tailor-braided thermoplastic composite beam structures
- Magnetorheological elastomer composites: Modeling and dynamic finite element analysis
- Elastic wave characteristics in damped laminated composite nano-scaled shells with different panel shapes
- Optimization of three- dimensional up to yield bending behavior using a full layer -wise theory for FGM rectangular plate subjected to thermo- mechanical loads
- Thermal buckling and free vibration of composite sandwich curved panels
- Experimental study of a novel continuous FRP-UHPC hybrid beam
- The Propagation of Uncertainty in the Geometrically Nonlinear Responses of Smart Sandwich Porous Cylindrical Shells Reinforced with Graphene Platelets
- Compressive behavior and modelling of engineered cementitious composite (ECC) confined with LRS FRP and conventional FRP
- Structural safety of pultruded frp profiles for global buckling. Part 2: Reliability-based evaluation of safety formats and partial factor calibration
- Thermoelastic analysis of stiffened sandwich doubly curved plate with FGM core under low velocity impact
- Effect of multi-layered IIR/EP on noise reduction of aluminium extrusions for high-speed trains
- Damping and mechanical behaviour of composite laminates interleaved with rubbery nanofibers
- Nondestructive determination of local material properties of laminated composites with the Impulse Excitation Technique
- Forced vibration analysis of composite beams with piezoelectric layers based on the variable separation method
- Size-dependent behaviors of three directional functionally graded shear and normal deformable imperfect microplates
- A new general third-order zigzag model for asymmetric and symmetric laminated composite beams
- Corrigendum to: ‘Design of composite laminated plates for maximum buckling load with stiffness and elastic modulus constraints’ [Compos. Struct. 148 (2016) 27–38]
- Corrigendum to “Effect of automated fiber placement (AFP) manufacturing signature on mechanical performance of composite structures” [Compos. Struct. 228 (2019) 111335]
- Theoretical, emulation and experimental analysis on auxetic re-entrant octagonal honeycombs and its applications on pedestrian protection of engine hood
- Size optimization method for controlling the buckling mode shape and critical buckling temperature of composite structures
- An elastic–plastic stress analysis of thermoplastic composite beams loaded by bending moments
- Vibrations of double-nanorod-systems with defects using nonlocal-integral-surface energy-based formulations
- Experimental and Numerical Study on Concrete Beams Reinforced with Basalt FRP Bars under Static and Impact Loads
- Corrigendum to “An extension of the polar method to the First-order Shear Deformation Theory of laminates” [Compos. Struct. 127 (2015) 328–339]
- A size dependent meshfree model for functionally graded plates based on the nonlocal strain gradient theory
- Low-velocity impac, resonance, and frequency responses of FG-GPLRC viscoelastic doubly curved panel
- Corrigendum to ‘Closed-form approximate solution for heat transfer analysis within functionally graded plate with temperature-dependent thermal conductivity’ [Composite structures 271 (2021) 114140]
- Multiscale collaborative process optimization method for automated fiber placement
- Polymer composite materials : A comprehensive review
- Erratum to “Rapid repair and replacement of earthquake-damaged concrete columns using plastic hinge relocation” [Compos. Struct. 180 (2017) 467–483]
- On buckling behaviors of a typical bending-dominated periodic lattice
- On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory
- Engineering Composite Materials
- Axial crashworthiness performance of foam-based composite structures under extreme temperature conditions
[ صفحه 1 از 123 ]
بعدی