- Corrigendum to “Effect of temperature on the rheological behavior of a new aqueous liquid crystal bio-lubricant” [J. Mol. Liq. 301 (2020) 112406]
- Corrigendum to “Thermodynamic analysis and molecular dynamic simulation of solid-liquid phase equilibrium of griseofulvin in three binary solvent systems”
- Corrigendum to "Cattaneo-Christov heat flux model for the Sisko fluid flow past a permeable non-linearly stretching cylinder" [J. Mol. Liq. 222 (2016) 430-434]
- Corrigendum to “Solubility of four novel Brønsted-acidic ionic liquids with 8-hydroxyquinoline cation in six alcohols” [J. Mol. Liq. 219 (2016) 923–929]
- Corrigendum to “Thermodynamic representation of ionic liquids phase equilibrium with the Wilson-NRF model” [J. Mol. Liq. 223 (November 2016), 541–548]
- Corrigendum to “Multiwalled carbon nanotube–polyurethane (MWCNT/PU) composite adsorbent for safranin T and Pb(II) removal from aqueous solution: Batch and fixed-bed studies” [J. Mol. Liq. 212 (2015) 467–479]
- Retraction notice to “Kinetics and thermodynamics of methyl orange adsorption from aqueous solutions—artificial neural network-particle swarm optimization modeling” [J. Mol. Liq, 218, June 2016 354–362].
- Corrigendum to “Enhanced dispersion of carbon nanotubes in water by plasma induced graft poly(N,N-dimethylacrylamide) and its application in humic acid capture” [J. Mol. Liq. 277 (2019) 380–387]
- Molecular dynamics simulation
- Charge separation at the ice/water interface: a molecular dynamics simulation study of solute ions at the ice basal plane
- Corrigendum to “Mutual effects behind the simultaneous U(VI) and humic acid adsorption by hierarchical MWCNT/ZIF-8 composites” [J. Mol. Liq. 288 (2019) 11097]
- The problems of solvation, complex formation and crystallization challenging the development of smart materials
- WITHDRAWN: Dynamical aspects of water-poly(ethylene glycol) solutions studied by 1H NMR
- Viscosities and densities of binary liquid mixtures of TBP with benzene, toluene and ortho-xylene
- Corrigendum to “Removal of radiocobalt from aqueous solutions using titanate/graphene oxide composites” [J. Mol. Liq. 209 (2015) 397–403]
- Corrigendum to ‘The micellar and thermophysical studies of a surfactant, sodium dodecyl sulfate with a hydrotrope, 3-Nitrobenzene sulfonic acid sodium salt’ [MOLLIQ 315 (2020) 113815]
- Corrigendum to “Cocoa butter and cocoa butter substitute as a lipid carrier of Cuminum cyminum L. essential oil; physicochemical properties, physical stability and controlled release study” [J. Mol. Liq. Volume 314, 15 September 2020, 113,638]
- Toxicity of heavy metals in plants and animals and their uptake by magnetic iron oxide nanoparticles
- A review on heavy metal pollution, toxicity and remedial measures: Current trends and future perspectives
- Recent advances in removal techniques of Cr(VI) toxic ion from aqueous solution: A comprehensive review
- The recent advancement of low-dimensional nanostructured materials for drug delivery and drug sensing application: A brief review
- A new two-parameter equation for correlation and prediction of densities as a function of concentration and temperature in binary aqueous solutions
- An updated review on the influential parameters on thermal conductivity of nano-fluids
- Transition metal nanoparticles in ionic liquids: Synthesis and stabilization
- Removal of anionic pollutants from liquids by biomass materials: A review
- Towards hybrid nanofluids: Preparation, thermophysical properties, applications, and challenges
- Advances in carbon nanomaterials as lubricants modifiers
- [sciencedirect.com] An overview on plant extracts as environmental sustainable and green corrosion inhibitors for metals and alloys in aggressive corrosive media
- Ionic liquids synthesis and applications: An overview
- Fundamental importance of ionic interactions in the liquid phase: A review of recent studies of ionic liquids in biomedical and pharmaceutical applications
- Comprehensive study on nanofluid and ionanofluid for heat transfer enhancement: A review on current and future perspective
- Ionic liquids: Innovative fluids for sustainable gas separation from industrial waste stream
- Perspectives and guidelines on thermodynamic modelling of deep eutectic solvents
- Cellulose based grafted biosorbents - Journey from lignocellulose biomass to toxic metal ions sorption applications - A review
- Conductive polymers in water treatment: A review
- Aqueous phase environmental friendly organic corrosion inhibitors derived from one step multicomponent reactions: A review
- Adsorption of organic pollutants by nanomaterial-based adsorbents: An overview
- Robust membranes with tunable functionalities for sustainable oil/water separation
- Dynamics of oil-water interface demulsification using multifunctional magnetic hybrid and assembly materials
- Recent advances in nano-Fenton catalytic degradation of emerging pharmaceutical contaminants
- Recent developments in modification of lignin using ionic liquids for the fabrication of advanced materials–A review
- Current treatment technologies and mechanisms for removal of indigo carmine dyes from wastewater: A review
- A review on adsorptive removal of oil pollutants (BTEX) from wastewater using carbon nanotubes
- The impacts of nanotechnology on the improvement of liquid insulation of transformers: Emerging trends and challenges
- An overview of graphene oxide supported semiconductors based photocatalysts: Properties, synthesis and photocatalytic applications
- Recent advances on organic coating system technologies for corrosion protection of offshore metallic structures
- Magnetic (poly) ionic liquids: A promising platform for green chemistry
- Nanoparticle enhanced PCM applications for intensification of thermal performance in building: A review
- A review on graphene based nanofluids: Preparation, characterization and applications
- Flow assurance issues in deep-water gas well testing and mitigation strategies with respect to gas hydrates deposition in flowlines—A review
[ صفحه 1 از 82 ]
بعدی