- Corrigendum to “Characterization of cooling rate and microstructure of CuSn melt droplet in drop on demand process” [Trans. Nonferrous Met. Soc. China 27 (2017), 1636–1644]
- Recent advances in pseudocapacitor electrode materials: Transition metal oxides and nitrides
- Review of gold leaching in thiosulfate-based solutions
- Microstructural approach to equal channel angular processing of commercially pure titanium—A review
- Typical roles of metal ions in mineral flotation: A review
- Liquid−liquid structure transition in metallic melt and its impact on solidification: A review
- Mechanism and kinetics of iron extraction from high silica boehmite–kaolinite bauxite by hydrochloric acid leaching
- A review on steel thixoforming
- Efficient energy absorption of functionally-graded metallic foam-filled tubes under impact loading
- Electrochemical corrosion behavior of arc sprayed Al–Zn–Si–RE coatings on mild steel in 3.5% NaCl solution
- A review on in vitro corrosion performance test of biodegradable metallic materials
- Effect of frequency and pulse-on time of high power impulse magnetron sputtering on deposition rate and morphology of titanium nitride using response surface methodology
- Local inhomogeneity of mechanical properties in stir zone of friction stir welded AA1050 aluminum alloy
- Crystal plasticity based modeling of grain boundary sliding in magnesium alloy AZ31B sheet
- Processing and characterization of AZ91 magnesium alloys via a novel severe plastic deformation method: Hydrostatic cyclic extrusion compression (HCEC)
- Three-dimensional upper bound limit analysis of underground cavities using nonlinear Baker failure criterion
- Strain anisotropy models for refined diffraction line profile analysis in cubic metals
- Empirical model for bio-extraction of copper from low grade ore using response surface methodology
- Biological, antibacterial activities and electrochemical behavior of borided commercially pure titanium in BSA-containing PBS
- Key R&D activities for development of new types of wrought magnesium alloys in China
- Total concentrations and different fractions of heavy metals in sewage sludge from Guangzhou, China
- [sciencedirect.com] Thermal dehydration kinetic mechanism of Mn1.8Co0.1Mg0.1P2O7·2H2O using Málek's equations and thermodynamic functions determination
- Corrosion behaviour of as-cast ZK40 with CaO and Y additions
- Development of hydrometallurgical process for indium recovery from waste liquid crystal display using Cyphos IL 101
- Leaching of chalcopyrite with hydrogen peroxide in hydrochloric acid solution
- Role of Kirkendall effect in diffusion processes in solids
- Corrosion and wear resistance of AZ31 Mg alloy treated by duplex process of magnetron sputtering and plasma electrolytic oxidation
- Research status of carbonaceous matter in carbonaceous gold ores and bio-oxidation pretreatment
- Antibacterial activities and corrosion behavior of novel PEO/nanostructured ZrO2 coating on Mg alloy
- Research progress of Ag3PO4-based photocatalyst: Fundamentals and performance enhancement
- High-cycle fatigue and fracture behaviours of SLM AlSi10Mg alloy
- Shear localization behavior in hat-shaped specimen of near-α Ti−6Al−2Zr−1Mo−1V titanium alloy loaded at high strain rate
- Effect of laser surface melting on surface integrity of Al−4.5Cu composites reinforced with SiC and MoS2
- Advance and trend of friction study in plastic forming
- Recent progress in Mg-Li matrix composites
- Effect of surface dissolution on kinetic parameters in flotation of ilmenite from different gangue minerals
- Microstructural, mechanical and shape memory characterizations of Ti–Mo–Sn alloys
- Microstructural and mechanical properties assessment of transient liquid phase bonding of CoCuFeMnNi high entropy alloy
- Evaluation of LaAlO3 as top coat material for thermal barrier coatings
- New insights into microstructural changes during transient liquid phase bonding of GTD-111 superalloy
- Corrosion resistance of Ti and Ti–Pd alloy in phosphate buffered saline solutions with and without H2O2 addition
- Effects of non-isothermal annealing on microstructure and mechanical properties of severely deformed aluminum samples: Modeling and experiment
- Effect of friction stir processing on corrosion of Al-TiB2 based composite in 3.5 wt.% sodium chloride solution
- Synergistic effect of CeCl3 and benzotriazole on corrosion resistance of naturally aged and artificially aged AA2024 aluminium alloy
- Combined effect of isothermal annealing and pre-compression on mechanical properties of Cu36Zr48Al8Ag8 bulk metallic glass
- Individual and synergistic effect of gamma alumina (γ-Al2O3) and strontium on microstructure and mechanical properties of Al-20Si alloy
- First-principles thermodynamics of metal-oxide surfaces andinterfaces: A case study review
- Fabrication of AA2024−TiO2 nanocomposites through stir casting process
- A discontinuous dynamic recrystallization model incorporating characteristics of initial microstructure
- Effect of sintering temperature on structure and tribological properties of nanostructured Ti–15Mo alloy for biomedical applications