view in publisher's site
- خانه
- لیست مقالات
- چکیده
The stress and deformation of stone column-improved soft clay by discrete element modelling
This study investigated the microscopic interaction and load transfer mechanism between the column and the soft clay. The discrete element method (DEM) was used in this study to simulate a stone column-improved soft clay under a plate loading condition. The aggregate and the soft clay were simulated using particles with different size distributions. The load-displacement behavior and bulging deformation from the DEM model reasonably matched the experimental results. The change of vertical stress of the column was complex and related to the bulging deformation. The radial stress of the column generally increased with settlement and showed high value in the shallow section. The soft clay developed high vertical and radial stresses in the shallow layers and in the zone close to the column. The contact force distribution changed greatly after loading. Part of the vertical load transferred from the column to the soft clay through strong particle interactions. The coefficient of radial stress, defined as the ratio of vertical stress to radial stress within the column, changed with the settlement and showed different values at different locations.
تنش و تغییر شکل ستون سنگی - خاک رس نرم اصلاحشده با مدلسازی آلمان مجزا
این مطالعه تعامل میکروسکوپی و مکانیزم انتقال بار بین ستون و خاک رس نرم را بررسی کرد.
روش آلمان مجزا (DEM)در این مطالعه برای شبیهسازی یک ستون سنگی - خاک رس نرم بهبود یافته تحت شرایط بارگذاری صفحه مورد استفاده قرار گرفت.
سنگ دانهها و خاک رس نرم با استفاده از ذرات با توزیع اندازه متفاوت شبیهسازی شدند.
رفتار بار - جابجایی و تغییر شکل برآمده از مدل DEM به طور منطقی با نتایج تجربی تطابق دارد.
تغییر فشار عمودی ستون پیچیده بود و به تغییر شکل برآمده مرتبط بود.
تنش شعاعی ستون معمولا با نشست افزایش مییابد و مقدار زیادی را در بخش کمعمق نشان میدهد.
خاک رس نرم تنشهای عمودی و شعاعی بالایی را در لایههای کمعمق و در منطقه نزدیک به ستون ایجاد کرد.
توزیع نیروی تماسی پس از بارگذاری تا حد زیادی تغییر کرد.
بخشی از بار عمودی از ستون به خاک رس نرم از طریق تعاملات قوی ذرات منتقل میشود.
ضریب تنش شعاعی، که به صورت نسبت تنش عمودی به تنش شعاعی درون ستون تعریف میشود، با نشست تغییر میکند و مقادیر متفاوتی را در مکانهای مختلف نشان میدهد.
ترجمه شده با 
- مقاله Civil and Structural Engineering
- ترجمه مقاله Civil and Structural Engineering
- مقاله مهندسی عمران و طراحی ساختار
- ترجمه مقاله مهندسی عمران و طراحی ساختار
- مقاله Environmental Engineering
- ترجمه مقاله Environmental Engineering
- مقاله مهندسی محیط زیست
- ترجمه مقاله مهندسی محیط زیست