- Numerical solution of three-dimensional backward heat conduction problems by the time evolution method of fundamental solutions
- High-Sensitivity Wearable and Flexible Humidity Sensor Based on Graphene Oxide/Non-Woven Fabric for Respiration Monitoring
- Effect of high intensity conditioning on aggregate size of fine sphalerite
- Reconfigurable patch antenna with switchable L‐shaped slots for circular polarization diversity
- Theoretical and Experimental Investigation of the Production of PMMA-Based Bone Cement
- Magnetorheological damper with multi-grooves on piston for damping force enhancement
- Electrochemical Sensing Based on Nitrogen-Doped Hollow Carbon Nanospheres Wrapped with MoS2 Nanosheets
- Polarization reconfigurable CPW-fed square slot antenna using pin diodes
- Entropy analysis in the Rabinowitsch fluid model through inclined Wavy Channel: Constant and variable properties
- Effect of cryorolling on microstructure and property of high strength and high conductivity Cu−0.5wt.%Cr alloy
- Effect of Mg on the stress relaxation resistance of Cu–Cr alloys
- Preparation and characterization of PPSU/PBNPI blend membrane for hydrogen separation
- High-Performance Detection of Concealed Forbidden Objects on Human Body with Deep Neural Networks Based on Passive Millimeter Wave and Visible Imagery
- Exchange correlation and magnetism in bcc Fe0.8Ni0.2 alloy
- Dealloying and morphology evolution of ordered and disordered Cu3Au
- Dual-cluster interpretation of binary eutectics associated with hexagonal close-packed solid solution phases
- A compact CPW-fed wideband metamaterial antenna using Ω-shaped interdigital capacitor for mobile applications
- High-Efficient Deep-Blue Light-Emitting Diodes by Using High Quality ZnxCd1-xS/ZnS Core/Shell Quantum Dots
- Functionalized oligoynes: comparison of theoretical parameters with experimental single molecule conductance
- Thermohydraulic behavior of concentric tube heat exchanger inserted with conical wire coil using mono/hybrid nanofluids
- Experimental validation of RANS and DES modelling of pipe flow mixing
- Effect of ZnO morphology on affecting bactericidal property of ultra high molecular weight polyethylene biocomposite
- Sonochemical synthesis of Zr-based porphyrinic MOF-525 and MOF-545: Enhancement in catalytic and adsorption properties
- Peridynamic modeling of delaminations in laminated composite beams using refined zigzag theory
- Silane-grafted sand membrane for the treatment of oily wastewater via air gap membrane distillation: Study of the efficiency in comparison with microfiltration and ultrafiltration ceramic membranes
- Fluid Flow And Heat Transfer from a Cylinder Between Parallel Planes
- Hydrogen production characteristics of a bioethanol solar reforming system with solar insolation fluctuations
- Oblique angle deposited silver islands on Ge20Se70Te10 film substrate for surface-enhanced infrared spectroscopy
- A comprehensive insight into the superelasticity measurement of laser welded NiTi shape memory alloys
- Martensite stabilisation effect in Ni-rich NiTi shape memory alloy with different structure and martensitic transformations
- In-situ synchrotron diffraction study of the localized phase transformation and deformation behavior in NiTi SMA
- Design, simulation and experimental characterization of a high-power density fuel cell
- Absolute measurements of the thermal conductivity of mixtures of alcohols with water
- Modeling and optimizing of anode-supported solid oxide fuel cells with gradient anode: Part II. Optimization and discussion
- The effects of fuel variability on the electrical performance and durability of a solid oxide fuel cell operating on biohythane
- Bioinspiration from fish for smart material design and function
- Early Stages of Growth of Plasma Polymer Coatings Deposited from Nitrogen- and Oxygen-Containing Monomers
- An intelligent approach to predicting the effect of nanoparticle mixture ratio, concentration and temperature on thermal conductivity of hybrid nanofluids
- Obtaining high-quality oil from monguba (Pachira aquatica Aubl.) seeds by using supercritical CO2 process
- Three-dimensional model for stacks of tubular high temperature proton exchange membrane fuel cells incorporating a thin layer approach for the membrane electrode assembly
- Wearable carbon nanotube-based fabric sensors for monitoring human physiological performance
- Diffusion of liquid hydrogen in time-dependent MHD mixed convective flow
- Application of a Fickian model of diffusion to the dehydration of graded specimens of a precious Australian sedimentary opal derived from Coober Pedy
- Si-induced precipitation modification and related age-hardening response of an Al–4Mg–1Cu–0.5Si alloy
- Investigation of wax deposition and effective diffusion coefficient in water-in-oil emulsion system
- Vibrations of Timoshenko beams with elastically restrained ends
- Recent Progress in Nanomaterial Enabled Chemical Sensors for Wearable Environmental Monitoring Applications
- On the advantages of mixed formulation and higher-order elements for computational morphoelasticity
- BMP‐6 Loaded Polyelectrolyte Complex Nanoparticles Inducing Osteogenic Differentiation and Apoptosis of Malignant Plasma Cells for Local Treatment of Multiple Myeloma
- Photonic crystal-enhanced fluorescence imaging immunoassay for cardiovascular disease biomarker screening with machine learning analysis
[ صفحه 1 از 2806 ]
بعدی